Framing A Wall Part 3 - Install

In this final video learn about learn about setting the wall in place and attaching it to the floor and sidewalls.

We're going to raise the wall up and put everything in place. We're going to attach it to the floor and to the side walls. We'll put the wall up here. We got our chalked line here down at the bottom. We're going to raise it up to there and kick it in here. Looks like we're going to have to do some shifting here. Let me get one started at the bottom. So, we're flushing the bottom there. We'll drive it in all the way. That should hold. I have a pretty good gap here. I'm going to have to shift that.

So, we have these steel cuts here. We're going to put two in each section here. Just long enough to hold. See that, down about 3/8ths of an inch into the cement. That holds the base down and we have the sides attached. That's more than enough to hold it. We really don't have anything on the top here as you can see because we're going to make an office here and go down that way. If this was a house, then we would attach it on top.